4 Ways To Fix A Frigidaire Dishwasher That Isn't Draining -

A puddle of residual water after a wash cycle indicates a draining issue, although the explanation may not be as obvious. Why isn’t my Frigidaire dishwasher draining the water? A clogged filter might prevent water from flowing through the dishwasher, resulting in puddles.

We have studied common Frigidaire dishwasher problems and want to share 4 tips with you.

Table of Contents

Why Isn’t My Frigidaire Dishwasher Draining Water? This Could Be the Reason

As enigmatic as that puddle in your dishwasher may appear, there are just a few possible causes. We’ll go over the most common causes of a Frigidaire dishwasher not draining water and how to fix them using the correct DIY solution.

Blocked Drain Hose

The drain hose is a thin, flexible plastic tube that links the dishwasher to the sink drain or garbage disposal, allowing water to drain. When it’s moved or clogged, it usually loops under the sink and can kink, blocking water flow. While you may be able to remove the blockage by gently straightening any kinks, a damaged hose must be replaced.

If the hose isn’t kinked, an inner obstruction could be preventing water from draining. Although a clogged hose should be removed by a professional, an experienced handyman can do it himself.

These steps will help you remove drain hose obstructions in general:

Disconnect the dishwasher.
To find the drain hose, read your Frigidaire dishwasher manual.
Connect the drain pipe to the pump and disconnect it.
Inspect the hose for clogs, then use a screwdriver or a straightened wire hanger to remove any obstructions gently.
If the clog isn’t reachable, the hose from the sink drain or disposal may need to be unplugged. If the obstruction cannot be reached, the drain pipe must be changed.

Cleaning the Dishwasher Filter

Large food particles are filtered away by a dishwasher filter, which keeps them from blocking the drain pump or hose. The filter itself might become clogged with debris over time, preventing water from draining. When your Frigidaire dishwasher refuses to drain, cleaning the filter is a simple solution. To avoid clogs, most dishwasher cleaning methods recommend cleaning the filters once a month.

Here’s how to clean the drain filter on a Frigidaire dishwasher:

Remove the bottom rack from the dishwasher.
Move the filter knob counterclockwise and press the wash arm.
To remove the filter with the spray arm, pull it upward.
To remove debris, separate the filter from the wash arm and rinse it under running water.
Reinstall the spray arm and filter in their appropriate compartments.
To lock the spray arm in place, turn the filter handle clockwise and press down on it.

Problem with the Drain Pump in the Dishwasher

The Frigidaire dishwasher drain pump works by pushing water out of the dishwasher through the drain line using the impeller. Food particles and dirt can sometimes clog the impeller, preventing proper drainage. To find out how to get to the drain pump and clear any blockages, refer to your owner’s manual.

In some cases, the drain pump motor fails, preventing the pump from draining water. A multimeter test is usually used to confirm the pump motor is malfunctioning. A professional dishwasher repair service should replace the pump if it shows signs of wear.

Problems With Air Gaps And Garbage Disposal

It is possible that the Frigidaire dishwasher is not draining due to an air gap or clogged garbage disposal rather than a dishwasher malfunction. If you have a garbage disposal or air gap, they likely share a drain with the dishwasher. The drain can become clogged if either of these devices becomes clogged with debris. During the wash cycle, water will flow back into the dishwasher.

Before beginning a wash cycle, run the disposal to empty the drain of any debris that may obstruct water flow. Opening the cap and removing any visible debris with a paper towel or nylon bristle brush is an easy way to clear air gaps.

Don’t let a broken Frigidaire dishwasher force you to wash every filthy dish by hand.